Im starting a corsa v6 project. Using the 2.5 v6 engine from a calibra.
Im a mechanic so i can put the engine in no problem, just knowing what mounts i will need ,drive shafts... ect.
Also the wiring? ant got a clue on that side of things.
Ive recently done a few other engine conversions, small cars big engines, like ive done an ax vts. old mini with a 2.0 bmw engine.
Now i want to do a Corsa b
Thanks
New help with corsa v6 conversion.
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 3
- Joined: Sat May 16, 2009 9:28 am
-
- CB-Uk User
- Posts: 218
- Joined: Sun Mar 01, 2009 6:03 pm
Re: New help with corsa v6 conversion.
The V6 conversion is not an easy one at all and most poeple wouldn't bother because at LET is a lot easier and gives similar power.
However if you wanna go for it then be prepared to spend a lot of money, here is a link to an old thread on migweb.co.uk
http://www.migweb.co.uk/forums/engines- ... dvice.html
It doesn't explain fully but gives you a good idea and im sure if you post on there they will be able to help you out.
However if you wanna go for it then be prepared to spend a lot of money, here is a link to an old thread on migweb.co.uk
http://www.migweb.co.uk/forums/engines- ... dvice.html
It doesn't explain fully but gives you a good idea and im sure if you post on there they will be able to help you out.
-
- CB-Uk Newbie
- Posts: 3
- Joined: Sat May 16, 2009 9:28 am
Re: New help with corsa v6 conversion.
i see matey, will take ur word for it, i supect a 2.0ltr will be alot easier?
Thanks alot
Thanks alot